Overview

The High Throughput Tissue Grinder is a fast, efficient and safe grinding system. Supports the extraction and purification of raw DNA, RNA and proteins including soil, plant and animal tissues, organs, bacteria, yeast, fungi, spores, and archaeal specimens. Support dry grinding, wet grinding and mixed grinding and homogenization. It can effectively improve grinding efficiency and quality, reduce labor costs, and reduce manual operation errors. It is a better choice for laboratories to replace manual grinding.

Performance introduction

  • Adopt three-dimensional oscillating motion to crush samples at high speed, saving operation time;
  • 7-inch LED high-resolution touch screen, beautiful interface, multiple sets of data displayed on one screen, easy to operate, Chinese and English bilingual interface;
  • Multi-segment cycle control programming can be set (such as: grinding time, cycle times, gap time, etc.);
  • Using high-end imported linear bearings, it runs smoothly at high speed and has a longer service life;
  • Built-in LabGeni-v3.0 quality traceability system to standardize market promotion and speed up after-sales progress;
  • The high hardness bearing movement rod is used with special process treatment to increase the stability and life of the product by more than 5 times.
  • Equipped with exclusive cleaning and disinfectant for grinding machine accessories, no corrosion, no peculiar smell, and has the national disinfection product platform filing qualification, accessories and consumables can be reused after cleaning and disinfection, which greatly reduces the procurement cost of consumables.

 

OPERATION STEPS

Performance characteristics

Adopt three-dimensional oscillating motion mode to crush samples at high speed, saving operation time.

5-inch OLED high-resolution touch screen, beautiful and elegant interface, multiple sets of data displayed on one screen, easy to operate, optional in Chinese and English.

Built-in high-end imported compressor, pre-cooling to minus -50°C for about 20 minutes, low temperature grinding, effectively avoiding the impact of friction and heat on the sample nucleic acid and protein.

Intelligent PID algorithm, more accurate temperature control, multi-segment control programming can be set, with screen lock function to avoid human touch operation errors.

Adopting high-end imported linear bearings, it runs smoothly at high speed and has a longer service life.

Adopt high-hardness SKD11 material to form one-piece bearing movement rod, with special processing, to increase the stability and life of the product by more than 5 times.

Equipped with high-quality brushless DC motor, which has more torque, less noise and more accurate speed.

Built-in LabGeni-v3.0 quality traceability system to standardize market promotion and strengthen after-sales progress.

Equipped with exclusive cleaning and disinfectant for grinding machine accessories, no corrosion, no peculiar smell, and has the qualification of national disinfection product platform record, accessories and consumables can be reused after cleaning and disinfection, which greatly reduces the procurement cost of consumables.

Specifications

MODEL TBM24LR TBM48LR TBM96LR TBM192LR
Maximum throughput of a single sample 0.2ml-0.5ml×24

2ml×24

5ml×12

7ml-15ml×4

25ml×2

0.2ml-0.5ml×48

2ml×48

5ml×24

7ml-15ml×8

25ml-50ml×2

0.2ml-0.5m1×96

2ml×96

5ml×48

7ml-15ml×12

25ml-100ml×4

96 hole plate×2pcs

2mI×192

5ml×96

7ml-15ml×24

25ml-100ml×6

rated power 250W 280W 375W 375W
temperature range 0 degrees – minus 50 degrees free setting
Working speed 0-70HZ free setting (1HZ=30 revolutions/second 10HZ=1.0M/s1HZ=10RPM)
Discharge particle size ≤5um
operating hours 1 second – 99 minutes free setting
Grinding bead material Material: stainless steel, chrome steel, zirconium oxide, tungsten carbide, quartz sand, glass beads, etc. Specifications: 0.1mm-30mm optional
Grinding tube and adapter material PE, PTFE, stainless steel, PEEK, zirconium oxide, aluminum alloy, etc. (metal fittings can be tested with liquid nitrogen)
Accel & decel time The maximum speed is reached within 2 seconds, and the minimum speed is reached within 2 seconds
noise level ≤50db
power supply AC220V/50Hz
Dimensions (L×W×H) 470×465×820mm 470×465×820mm 470×465×820mm 470×465×820mm
weight 55KG 55KG 55KG 55KG