PILOT-F Series Small Bench-top Pilot Freeze Dryer

PILOT-F Series Small Pilot Freeze Dryer

Main features

• The transparent door of the drying chamber adopts aerospace acrylic, high strength and no leakage.
• The partition pre-freezing function.
• Compressor, high efficiency and stability, low noise.
• South Korean brand vacuum pump has high pumping speed and low noise.
• It can be filled with nitrogen or inert gas for storage after drying.
• Freeze-drying automatic control system: programmable, programmable control from freeze-drying to defrosting.
• Layer heating control system: independent temperature control for each layer, thermal cycle monitoring and protection, special heating materials, fuzzy PID control algorithm.
• Cold trap defrosting system: non-electric heating defrosting method, high safety performance; fast defrosting speed, which solves the inconvenience caused by traditional immersion defrosting (optional).
• Freeze-drying end-point test system: It can automatically perform freeze-drying end-point test after the analysis and drying stage is over to ensure that the moisture content of the substance reaches the standard requirements (optional).
• Vacuum adjustment system: adjust the degree of vacuum during the sublimation and analysis drying process to avoid the problems of special material foaming, bottle blowing and speeding up the efficiency of freeze-drying (optional).
• Pulse backfilling system: three backfilling modes can be selected: slow, medium, and fast, which avoids the problem of effective substances being blown off and lost due to aeration of granular and flocculent substances after freeze-drying is completed (optional).
• Automatic drain system: After draining, it is interlocked with the vacuum system to avoid vacuum system failure (optional) caused by forgetting to close the drain valve when used again.
• It adopts industrial touch screen, which has good human-computer interaction, easy to understand, and can be operated easily without manual.
• Manual automatic mode selection: manual mode is used to explore the process parameters (strong human intervention), automatic mode is used in the mature stage of the process, one-key operation, simple and convenient.
• Data recording system: Multiple choices of data recording system. 1. The machine’s memory storage can be stored for up to 3 months. 2. External storage (U disk), the amount of stored data is related to the capacity of the U disk (optional). 3. PC database storage, the amount of stored data is related to the usable capacity of the computer hard disk (optional).
• Monitoring system: real-time monitoring system temperature, vacuum degree, acquisition frequency 50ms/time.
• Freeze-drying recipe storage function: 500 groups of fixed or user-defined freeze-drying recipes can be stored.
• PC remote monitoring system: It can remotely monitor the operation status of the equipment, and the maximum monitoring distance is 1.5KM (optional).
• Eutectic point test function (optional).
• Calibration function: temperature and vacuum calibration can be performed to ensure the accuracy of long-term use of the measured value.
• Freeze-drying curve query function (can query temperature and vacuum curve to facilitate process optimization and freeze-drying effect verification).

SAFETY

• Overcurrent protection
• Overload protection
• 36V safety voltage of heating system
• Heating over-temperature protection
• Vacuum protection during product freeze-drying
• Vacuum pump protection

Selection guide

• Pilot-10F-2/Pilot-20F-4 loading: suitable for loading bulk materials, bottled materials that need to be stoppered, and external bottled materials.
• Pilot-10F-2 type is suitable for drying water-soluble solutions, suspensions or pasty substances, and its eutectic point temperature is higher than -20℃.
• Pilot-20F-4 type is suitable for drying water-soluble solutions, suspensions or pasty substances, and its eutectic point temperature is higher than -40℃.

SPECIFICATIONS

OPTIONAL