LFZ-LBI series low temperature incubator uses of international brand compressors and circulating fans, high efficiency, low energy consumption, not only promote energy conservation, but also long life, can reduce noise to a lower limit, compared with the traditional cryogenic equipment, cooling time Reduced by more than 40%.

Usage Overview:
Widely used in storage media, serum, pharmaceuticals and microbial culture, environmental testing.

Features:

  1. Mirror stainless steel liner, semi-circular arc of four corners, shelf bracket can be freely loaded and unloaded, easy to clean in the box.
  2. Using a microcomputer temperature controller to quickly reach the setpoint and operate more accurately and accurately (standard digital controller).
  3. International brand compressors and circulating fans, environment-friendly refrigerant (R134a) has high efficiency, low energy consumption, and promotes energy conservation.
  4. There is a 25mm diameter test hole on the left side of the box for easy operation and temperature measurement.
  5. Independent temperature limit alarm system is provided. If the temperature exceeds the limit, it will be automatically interrupted to ensure safe operation of the experiment without accidents. (standard)
  6. Can be equipped with a printer or RS485 interface, used to connect printers and computers, can record changes in temperature parameters. (Optional)
  7. Multi-segment programming function and menu-type operation interface can simplify the complicated test process and truly realize automatic control and operation. (Optional)

LCD multi-stage programmable controller (optional)

  1. Multi-segment LCD controller, one-screen display of multiple parameters, and menu-type operation interface can simplify the complex test process and truly realize automatic control and operation.
  2. The parameters such as multi-stage temperature, circulating wind speed, time and heating rate can be set and programmed at the same time. It is possible to perform gradient control of temperature rise, temperature rise from the initial temperature inside the box, and other functions such as automatic start, standby, and shutdown.
  3. It can preset 7 groups of 63 steps programmable, each group of 9 steps, each set of time 1 ~ 9999 minutes.

Specifications:

Model LFZ-LBI-50CL
LFZ-LBI-50CA
LFZ-LBI-50CB
LFZ-LBI-100CL
LFZ-LBI-100CA
LFZ-LBI-100CB
LFZ-LBI-150CL
LFZ-LBI-150CA
LFZ-LBI-150CB
LFZ-LBI-250CL
LFZ-LBI-250CA
LFZ-LBI-250CB
LFZ-LBI-500CL
LFZ-LBI-500CA
LFZ-LBI-500CB
Temperature range

L: -10~65℃
A: -20~65℃
B: -40~65℃

Temperature resolution

0.1℃

Temperature fluctuation

High temp:±0.5℃    Low temp:±1.0℃

voltage

AC220V 50HZ
AC220V 50HZ
AC220V 50HZ

AC220V 50HZ
AC220V 50HZ
AC380V 50HZ

AC220V 50HZ
AC220V 50HZ
AC380V 50HZ

AC220V 50HZ
AC220V 50HZ
AC380V 50HZ

AC220V  50HZ
AC220V  50HZ
AC380V  50HZ

Working temperature

+5~35℃

input power

1100W
1500W
2800W

1100W
1450W
4100W

1300W
1700W
5100W

1500W
1900W
6100W

2250W
2550W
7100W

Liner size (mm) W×D×H

400×300×420
400×300×420
400×380×450

500×400×600
500×400×600
500×400×600

550×405×670
550×405×670
550×430×670

600×500×830
600×500×830
600×600×700

670×720×1020
670×720×1020
800×700×900

Dimensions (mm)
W × D × H

660×720×930
660×720×930
650×1040×1650

650×770×1320
650×770×1320
700×1040×1750

690×800×1410
690×800×1410
750×1040×1810

740×900×1580
740×900×1580
800×1160×1850

850×1100×1930
850×1100×1930
1000×1204×1985

Carrier bracket (standard)

2pcs

3pcs

Timing range

0-9999min

Optional List

1, multi-stage programmable liquid crystal temperature controller
2, embedded printer
3, RS485 interface and communication software

Note: RS485, Printer can only choose one from two.