Precision Thermostatic Incubator – cell culture (LFZ-BHPI series), 80°C

Precision Thermostatic Incubator – cell culture (LFZ-BHPI series), 80°C. Large-screen LCD display, multiple sets of data one screen.

Precision Thermostatic Incubator

User-friendly design

  1. Large-screen LCD display, multiple sets of data one screen, menu-driven user interface, easy to understand, observe and operate.
  2. mirror stainless steel liner, semi-circular corners transition, shelf removable, easy for cleaning.
  3. Unique air circulation system to ensure temperature uniformity studio. The left side of the box with a 25mm diameter test holes can be placed according to need and place any wiring.

  Quality Assurance

  1. Fuzzy PID controller, precise temperature control and small fluctuation, with timing function maximum setting is 99 hours and 59 minutes.
  2. Multi-stage programmable control, can simplify complex testing process, truly automatic control and operation. (Optional)

  Automatic fan speed control loop

  1. Circulation fan rate can be automatically controlled, when the inside temperature is a constant temperature, the speed will be reduced, cycle wind speed will be adjusted to a suitable cell growth of wind speed, avoid trial process due to excessive wind caused by volatilization of the sample.

  Self-diagnosis function

  1. When the incubator failure, the LCD display will appear error message, run fault glance.

  convenient data processing (optional)

  1. It can be connected a printer or 485 communication interface with USB data transfer interfaces (U disk) temperature and time profiles with a computer and printer recorded during the test data storage and playback to provide a strong guarantee.

  Security features

  1. Independent limit temperature alarm system, and sound and light alarm operator, to ensure safe operation without accidents. (Optional)
  2. High or low temperature and over-temperature alarm.

  multi-programmable controller (optional)

  1. Multi-segment LCD programmable controller, a variety of parameters a screen display, menu-driven user interface that simplifies complex testing process, truly automatic control and operation.
  2. multi-temperature, cycle speed, time and heating rate and other parameters can be set at the same time and can be programmed to control the temperature gradient rising from inside the initial temperature was slowly raised, and other functions, can also be pre-set to automatically boot, so standby and shutdown.
  3. Can be preset programmable 7-segment 63 steps, each nine steps, each set for 1 to 99 hours, 59 minutes.

  UV disinfection system (optional)

  1. Inside the box can be regularly disinfected cabinets can effectively kill bacteria floating in the air circulation, so as to effectively prevent contamination during cell culture.








AC220V 50HZ

Temperature range

RT+5 ~ 80°C

Temp. resolution


Temperature uniformity


Working temperature

+5 ~ 35°C

Input power





Inner size (mm)W×D×H






2 pcs

Optional items

1. Programmable LCD temperature controller
2. Built-in printer
3. Independent temperature limit controller
4. RS485 interface with software
5. Ultraviolet sterilization systems
6. USB interface

Go to Top