Lab Vertical Large Capacity Vacuum Dry Oven – Digital Vacuum controlled

Lab Vertical Large Capacity Vacuum Dry Oven – Digital Vacuum controlled. Cuboid studio to maximize the effective volume.

PRODUCT MODEL: DO-VP Vacuum Control Category: Tag:

Large Capacity Vacuum Dry Oven

Large Capacity Vacuum Dry Oven

Features:

  1. Cuboid studio to maximize the effective volume, microcomputer temperature controller, accurate and reliable temperature control.
  2. The tempered and bullet-proof double-glazed door can observe the objects in the working chamber at a glance, and can be filled with inert gas inside.
  3. The door is closed tightly and adjustable, and the integral silicone rubber door seal ring ensures high vacuum inside the box.
  4. The studio is made of stainless steel sheet material to ensure durability and easy cleaning.
  5. Storage, heating, testing and drying can be carried out in the absence of oxygen or in an inert atmosphere, without causing oxidation.
  6. Reduce drying time and reduce drying time by more than 50% compared with conventional vacuum drying ovens.

Drying process control:

Vacuum drying process control provides a programmable vacuum cycle that can be further reduced by simply setting the highest and lowest vacuum values ​​according to your requirements. For example, the vacuum cycle is controlled by a program, and the minimum vacuum degree is 50 Pa, the maximum vacuum degree is 900 Pa, and the number of cycles is 6 times, and the drying process is as shown in the figure. As each cycle progresses, the humidity continues to decrease and the drying speed is significantly accelerated, with a maximum number of cycles of up to 99.

Cyclic program control function:

User-friendly operation interface and programming program save customer time and ensure reliable heating or drying process. It can be programmed directly in the operation interface. It can preset 7 groups of 63-step programmable, each set time 1-99 hours 59 minutes. , can be preset boot and shutdown time.

Vacuum control:

The vacuum drying oven uses digital technology to control the vacuum. The vacuum is automatically controlled by a digital vacuum gauge to provide you with more accurate and effective vacuum control. Through the panel, it is convenient to control the degree of vacuum between any two points or areas within the range of 10~10 5 Pa (lowest to 133 Pa vacuum) with a control accuracy of ±1%. The vacuum gauge uses a resistive silicon tube pressure sensor to ensure a stable pressure value, independent of the air flow, and to pass a stable pressure value to the vacuum gauge LED display.

Temperature control advantages:

It has 7 sets of 63-step temperature programmable functions: it has the traditional program control mode, and can also set the temperature and constant temperature time, meaning “temperature ~ the temperature constant temperature time”, DO-VP-LC also includes the slope mode program control, to use “temperature – The time-temperature format defines the time required to rise or fall from one temperature to another to accurately control the rate of the rise or fall process. This allows you to control each process, whether it is warming, constant temperature or cooling, throughout the temperature experiment.

Specifications:

product

Large than 90L

model

DO-VP-6933LC

DO-VP-6503LC

DO-VP-6213LC
DO-VP-6213LCB

DO-VP-6123LC
DO-VP-6123LCB

Technical indicators

AC380V 50HZ

AC220V 50HZ

voltage

5600W

3800W

2100W

2050W

input power

RT+10~200℃

Temperature control range

0.1℃

Temperature resolution

±1℃

Constant temperature fluctuation Digital Display
Vacuum gauge Resistive silicon tube pressure sensor
Vacuum sensor 10~105Pa (minimum vacuum 133Pa)
Vacuum control range

750×1160×1050

630×810×845

560×600×640

500×500×500

Liner size (mm) W × D × H

1400×1395×2010

1000×1040×1855

720×820×1750

660×640×1400

Dimensions (mm) W × D × H

5pcs (independent temperature control)

4pcs (independent temperature control)

3pcs (independent temperature control)

3pcs

shelf

SS304(1Cr 18Ni9Ti)

product

Small than 90L

model

DO-VP-6093LC
DO-VP-6093LCB

DO-VP-6063LC
DO-VP-6063LCB

DO-VP-6033LC
DO-VP-6033LCB

Technical indicators

AC220V 50HZ

voltage

1350W

1800W

1200W

input power

RT+10~200℃

Temperature control range

0.1℃

Temperature resolution

±1℃

Constant temperature fluctuation Digital Display
Vacuum gauge Resistive silicon tube pressure sensor
Vacuum sensor 10~105Pa (minimum vacuum 133Pa)
Vacuum control range

450×450×450

400×400×400

320×320×320

Liner size (mm) W × D × H

610×590×1350

600×570×1390

550×490×1240

Dimensions (mm) W × D × H

2 pcs (independent temperature control)

3pcs

2pcs

shelf

SS304(1Cr 18Ni9Ti)

Go to Top