CO2 Carbon dioxide incubator

CO2 Carbon Dioxide Incubator Features:

Humanized design
● Stackable (two layers) for easy use of laboratory space, microcomputer LCD controller, precise and reliable control. The stainless steel inner liner and the shelf are used, and the four corners and half arcs are transitioned, and the shelf bracket can be freely loaded and unloaded to facilitate the cleaning of the studio.

Infrared sensor
● Infrared (IR) sensor has the characteristics of monitoring the speed of carbon dioxide gas and being immune to fluctuations in temperature and humidity. Even when it is used by many people, it is necessary to open the door frequently and close the door to maintain the stability of CO 2 concentration in the tank. And even. The thermal conductivity sensor is susceptible to temperature and humidity, and has long response time and large detection error. For long-term use, it needs frequent calibration and other defects.

Microbial high efficiency filter
● CO 2 inlet is equipped with high-efficiency micro-filter. For particles with diameter greater than or equal to 0.3μm, the filtration efficiency is up to 99.99%, effectively filtering bacteria and dust particles in CO 2 gas.

Circular fan speed automatic control
● The speed of the circulating fan can be automatically controlled. When the temperature inside the box is at a constant temperature, the speed will decrease, and the circulating wind speed will be adjusted to the wind speed suitable for cell growth, avoiding the evaporation of the sample due to excessive air volume during the test.

Door temperature heating system
● The incubator door can heat the inner glass door, which can effectively prevent the glass door from generating condensed water and prevent the possibility of microbial contamination caused by the glass door condensate.

Safety function
● Independent temperature limit alarm system (optional) to ensure safe operation of the experiment without accidents.
● Low temperature, high temperature, over temperature alarm and long door open alarm function.

UV sterilization system
● The ultraviolet germicidal lamp is located at the back side of the top of the box. It can periodically disinfect the inside of the box, which can effectively kill the circulating bacteria in the box and the floating bacteria in the humidifying tray, thus effectively preventing contamination during cell culture.

CO2 Carbon dioxide incubator Technical Parameters

model

LFZ-COI-50CH
LFZ-COI-80CH

LFZ-COI-150CH
LFZ-COI-190CH

LFZ-COI-240CH

LFZ-COI-30CW
LFZ-COI-80CW

LFZ-COI-150CW

voltage

AC220V 50HZ

input power

450W/500W

750W

750W

250W/680W

950W

heating method

Air jacket

Water jacket

Temperature range

RT+5~50℃

Working temperature

+5~30℃

Temp. fluctuation

±0.2℃

±0.1℃

CO2 control range 0-20%
CO2 control accuracy ±0.1% (infrared sensor)
CO2 recovery time (Open the door to 30 seconds to restore 5%) ≤ 3 minutes
Temperature recovery (Open the door for 30 seconds to return to 37 ° C) ≤ 8 minutes
Relative humidity Natural evaporation ≥90%
Volume

50L/80L

150L/190L

240L

26L/80L

150L

Liner size (mm)
W × D × H

400×350×350
400×450×500

480×530×610
520×530×690

600×630×670

290×290×310
400×400×500

500×500×650

Dimensions (mm)
W × D × H

580×450×540
590×657×870

670×710×950
708×710×1030

788×837×940

440×410×544
550×520×764

650×615×914

Carrier bracket (standard)

2pcs

2pcs

3pcs

2pcs

3pcs

Disinfection method

UV disinfection


Optional

1, RS485 interface and communication software
2, dedicated carbon dioxide pressure reducing valve
3. Humidity display system
4, independent temperature limit controller
5, embedded printer
Note: RS485/232, printer two choice one