Main feature:

  1. Excellent corrosion resistance: the diaphragm, valve plate, air chamber, gas pipeline, exhaust and exhaust joints and other parts that are in contact with other parts are made of corrosion-resistant materials such as PTFE\FFKM and are suitable for a variety of complex environments.
  2. High vacuum degree: ultimate pressure can reach 600 pa .
  3. Fast pumping: the pumping rate can reach 33L per minute .
  4. Strong power: 200 W power motor, strong power, large output torque, and stable speed.
  5. Low temperature rise: Reasonable air duct design and larger fan blades enable better motor heat dissipation, lower pump body temperature, and surface temperature not higher than 50 °
  6. Stable operation: The transmission mechanism has undergone special dynamic balancing treatment, the amplitude of the machine body is small, and the operation is stable.
  7. New appearance design: After a new appearance design, the diaphragm pump is smaller in size and lighter in weight.

Technical Parameters:

Model DP-633
Pumping rate 33L/min
ultimate pressure 600pa/6mbar
rated power 200W
voltage 200V  50HZ
Quantity of pumped air 1or2
Exhaust diameter 7mm
Gas ballast function have
Valve material FFKM
Diaphragm material PTFE+FKM
Gas line material PTFE
Exhaust joint material PTFE+C
Gas ballast material PTFE+C
weight 9.5Kg